Detailed analysis of 3 principle characteristics of Port Salut type cheese
Develop quality control test method for detection of critical physical characteristics between production batches.
Texture Profile Analysis principles were applied to carefully prepared samples taken from each block of cheese supplied. Each sample was compressed twice enabling determination of key properties by comparing the load profiles of both peaks.
In semi-solid materials such as cheese hardness, springiness and cohesiveness (as defined below) are important to sensory perception by the consumer.
Uniform samples were removed from the cheese block with a cork borer 25mm in diameter and trimmed flat at both ends to form 30mm high cylinders. Samples with visible fractures or anomalies were discarded. Each sample was centrally located beneath the test probe at ambient temperature of 22°C. Both the sample table and the face of the probe were lightly coated with vegetable oil to minimize lateral stresses on the sample during compression. The sample was compressed following the conditions given in Table 1 while sample response was recorded.
Click to enlarge
This test method can produce reliable indications of the physical properties of the cheese samples. The method itself requires careful sample preparation, and placement, on the texture analyser. It is most important that each cylindrical sample have flat, square ends. This is critical to avoid surface effects at the beginning of the force-deformation curve which cause excessive variations in hardness results.
The technique successfully discriminated between the samples supplied and demonstrated that Hardness as a parameter is key to this differentiation. The parameters of Springiness and Cohesiveness will provide an invaluable indication of cheese elasticity and overall internal strength respectively.
Test conditions which will affect results generated: