The Global Leader In Viscosity For Over 75 Years

SEARCH

Brookfield AMETEK

Cheese, Soft

Application

Comparison of product softness of full, medium and low fat soft cheese, using the 45 cone.

Test Objective

To determine the spreadability and softness of cheeses using the 45 cone probe

Background

Soft cheeses are cheeses with moisture contents between 48% and 80%. Full fat soft cheeses should not contain more than 60% moisture with a fat content greater than 20%. Texture analysis plays a vital role in the quantification of curd characteristics where it acts as a rheological predictor of finished product quality, as well as a potential indicator of moisture content. Stabilizer systems build solids, increase viscosity and enhance product mouthfeel (creamy texture) and flavour release. Texture analysis thus plays an essential role in the development of low fat foods where the product developer wishes to mimic the texture profile of full fat counterparts.

This test compared:

  1. Full fat = 30% fat, with 8% protein
  2. Light = 15% fat, with 12% protein
  3. Extra light = 6% fat, with 15% protein

Test Configuration

Samples were removed from refrigerator at 6.8 C, located beneath the test probe and evaluated within original container. Three replicate tests were made within the same sample. Three minutes elapsed between the first and last test.

Typical Results

Observation

The force deformation curves of the three products show dramatic variation of textural characteristics. The full fat product is the most firmly set, possessing the greatest values for modulus, hardness, and adhesion. The half fat product had the lowest values of the three soft cheeses. The extra light sample exhibited characteristics between those of the other two materials.

Parameters


Click to enlarge

Results

Conclusion

The full fat product has the firmest texture. The light product is very soft in comparison. The extra light product falls between both the full fat and light samples, with a structured consistency resulting from stabilization with increased milk protein and additives. The inclusion of these compounds failed to mimic the overall profile of the full fat sample.