The Global Leader In Viscosity For Over 75 Years

SEARCH

Brookfield AMETEK

Cake, Sponge

Application

Evaluation of soft sponge cake (Madeira cake)

Test Objective

Quantify the textural properties of the cake as an indicator of baking conditions imposed using Texture profile analysis (TPA)

Method

Two commercially available Madeira cakes were assessed using the LFRA texture analyser at three different levels of deformation: 25%, 50%, and 75%. True compression was imposed using a 50.8mm Perspex cylinder probe to samples standardised by cutting cubes of 26 mm x 26 mm x 45 mm from the base of the cake.

Samples were removed from refrigeration at <8C and tested within their original packaging. 3 readings from each sample were taken and average values for each parameter calculated.

Parameters


Click to enlarge

Results


Click to enlarge

Observation

The loads increase linearly between the 25% and 50% deformation cycles, while a steep increase and change in characteristics is observed at the higher 75% deformation. 50% gives greatest correlation due to elimination of base effects. While base effect is clearly evident at the higher 75% deformation.

Conclusion

The method follow traditional principle recognized throughout the food industry as indicators of product texture as a means of sensorial correlation and process control. The method is therefore an invaluable tool for both the product developer and the QC departments as a means of consistent quality production and efficient effective product development.