Vane Spindles

For use with paste-like materials, gels and fluids
Vane Spindle Set 201x583

Vane spindles are typically used for paste-like materials, gels, and fluids where suspended solids migrate away from the measurement surface of standard spindles.


 

FEATURES & BENEFITS 

  • Minimal disruption of sample during spindle immersion
  • Keeps particles in suspension during testing cycle
  • Viscosity data includes complete flow curve analysis
  • Provides information on yield behavior at low rotational speeds
  • Follows industry recommendations on length/diameter ratios for vane spindles
  • 3-piece spindle set (V-71, V-72 and V-73) for versatile range capability

EZ-LOCK OPTION**
Vane Spindles can also available to purchase with an EZ-Lock spindle couple system. This option allows spindles to be quickly attached and removed, and may also help prevent against damage that can occur from frequent spindle changes or multiple users. Please contact Brookfield or an authorized dealer for additional details and part numbers. Existing Vane Spindles can also be retrofitted with a special coupling adapter. Please contact Brookfield or an authorized dealer for details and part numbers.

**Note: for use with instruments purchased with and EZ-lock coupling system.


<<insert 1 image>>

 

 
  • Specifications +


    SPECIFICATIONS

    Vane Spindle Ranges
    SPINDLE TORQUE
    RANGE
    SHEAR STRESS RANGE
    (Pa)
    VISCOSITY RANGE
    Cp (mPa · s)
    V-71 NOT RECOMMENDED FOR USE ON LV TORQUE
    V-72 LV .188-1.88 104.04-1.04K
    V-73 LV .938-9.38 502-5.02K
    V-74 LV 9.38-93.8 5.09K-50.9K
    V-75 LV 3.75-37.5 1.996K-19.96K
    V-71 RV .5-5 262-2.62K
    V-72 RV 2-20 1.11K-11.1K
    V-73 RV 10-100 5.35K-53.5K
    V-74 RV 100-1K 54.3K-543K
    V-75 RV 40-400 21.3K-213K
    V-71 HA 1-10 524-5.24K
    V-72 HA 4-40 2.22K-22.2K
    V-73 HA 20-200 10.7K-107K
    V-74 HA 200-2K 108.6K-1.086M
    V-75 HA 80-800 42.6K-426K
    V-71 HB 4-40 2.096K-20.96K
    V-72 HB 16-160 8.88K-88.8K
    V-73 HB 80-800 42.8K-428K
    V-74 HB 800-8K 434.4K-4.344M
    V-75 HB 320-3.2K 170.4K-1.704M
    V-71 5XHB 20-200 10.48K-104.8K
    V-72 5XHB 80-800 44.4K-444K
    V-73 5XHB 400-4000 214K-2.14M
    V-74 5XHB 4K-40K 2.172M-21.72M
    V-75 5XHB 1.6K-16K 852K-8.52M
    Note:
    1. Pa=10 dyne/cm2
    2. Viscosity range is given at rotational speed of 10 RPM
    3. 5xHB is the highest torque range available
    4. Not for use with DVE Viscometers
    M=1million K=1thousand Pa=pascal cP=centipoise mPa · s=millipascal · seconds
  • Downloads +