TC-250

TC-250 201x583
Why control temperature for viscosity measurement? Detecting changes in your sample's properties is valuable information for predicting your product's performance. Temperature control during viscosity measurement helps ensure accurate test results. The addition of a bath is a smart investment and the Brookfield Model 250 is the perfect complement!


FEATURES & BENEFITS

Configured for measuring multiple samples directly in the bath
Work area accommodates 600 mL and 1000 mL beakers (cover is removable for large sample container requirements)
Built-in tap water cooling coil
Built-in circulator pump


CONTROLLER FEATURES

MX Series SD Series AP Series
Economical Best Value Total Touch Screen Interface
Large Character Display Programmable with PC Control using RheocalcT Software Standalone Programmable
Single Speed Pump 2-Speed Pump Variable Speed Pump
Maximum Temperature up to 135°C Quick Scroll to Set Temeprature to Standalone Mode PC Control with RheocalcT Software

  • Specifications +


    SPECIFICATIONS

    TC-250 Bath
    MODEL Temperature Range Low Temperature Range High Controller Cooling Temperature Stability
    ††
    TC-250AP* Ambient +10° † +150 ° C AP Tap Water** 0.01 ° C
    TC-250SD* Ambient +10° † +150 ° C SD Tap Water** 0.04 ° C
    TC-250MX* Ambient +10° † +135°C MX Tap Water** 0.07°C

    TC-250 Bath
    MODEL Digital Type
    Resolution
    (Set / Read)
    Reservoir
    Capacity
    Pump
    Speed
    Flow
    Rate
    Internal Work Area
    DxWxH (inches)
    Overall Dimensions
    DxWxH (inches)
    Weight (Gross)
    TC-250AP* Touch Screen 10 liters Variable 16 LPM 5.0 x 11.0 x 6.0 13.9 x 13.5 x 14.9 45 lbs
    TC-250SD* LCD/Scroll Touch 10 liters 2-speed 11 LPM 5.0 x 11.0 x 6.0 13.9 x 13.5 x 14.9 45 lbs
    TC-250MX* LCD 10 liters 1-speed 12 LPM 5.0 x 11.0 x 6.0 13.9 x 13.5 x 16.0 39 lbs
    *For use at lower temperatures, use the built-in tap water cooling or use model TC-351 Cooler for control to -20 ° C.
    **Tap water connection required.
    FOR TEMPERATURES HIGHER THAN 80 ° C PLEASE CONTACT BROOKFIELD FOR FLUID RECOMMENDATIONS.
    Note: Specify voltage and frequency when ordering.
    †Low temperature limit 10°C above ambient unless external cooling is used.
    †† Temperature stability may vary depending on bath volume, surface area, insulation and type of fluid.
  • Downloads +