STT-100 In-Line Viscometer

For In-Line System Applications

Features And Benefits

• Conforms to 3A sanitary conditions and has clean-in-place (CIP) design
• Continuous measurement eliminates need for "Grab" sampling and allows for prediction and constant control of final product properties
• Concentric cylinder geometry (Couette type) provides viscosity measurments at defined shear conditions
• Defined shear means agreement with Brookfield Laboratory measurements at equivalent shear rates
• Constant or variable speed motors available
• 4-20 mA output signal provides a variety of display and control capabilities
• Capable of a wide range of pressures, temperatures, viscosities, flow and shear rates
• Measurement "Zone" is protected from main flow, allowing accurate, repeatable measurement under variable conditions
• Mounts in-line supported by connections: Available in 3″ or 4″ pipeline connections; sanitary, threaded or flanged
• Easy to check and maintain calibration
• "Explosion Proof" configurations available for operation in hazardous environments

Specifications

Viscosity Range:	350 - 250,000 (cP/mPa·s)
Speeds:	single speed: application specific
Input Power:	115 Vac: 50/60 Hz 230 Vac: 50/60 Hz 24 Vdc 12 Vdc
Output:	4 - 20 mA

Options

• Explosion-proof FM and Atex approved design
• Standard design with flanged connections
• Variable speed motor
• Computer controlled variable speed viscometer

Applications

Low Viscosity
Adhesives, solvent based	Chemicals
Juices, Dairy Products	Oils
Petroleum Products	Paints, Inks, Coatings
Pharmaceuticals	Polymers
Medium Viscosity
Adhesives, waxes, hot melts	Asphalt
Ceramic Slurries	Drilling Fluids
Food Products	Gums, Resins
Inks, screen printing	Paper Coatings
Starches
High Viscosity
Caulking Compounds	Epoxies
Gels, Sealants	Inks, offset & lithographic