CAP Oil Fluids

Oil Viscosity Standards 201x583

General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.

Confused about which standards you need? See our FAQ section.


 FEATURES & BENEFITS

  • Accuracy: +/-1% of viscosity value
  • Appropriate for use at shear rates greater than 500 sec-1
  • Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP
  • Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes.  Note: Other oil fluids are available - call for details
  • Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers


ABOUT REACH COMPLIANCY

REACH is the European Community Regulation on chemicals and their safe use (EC 1907/2006). It deals with the Registration, Evaluation, Authorisation and Restriction of Chemical substances. The law entered into force on 1 June 2007.

The aim of REACH is to improve the protection of human health and the environment through the better and earlier identification of the intrinsic properties of chemical substances. At the same time, REACH aims to enhance innovation and competitiveness of the EU chemicals industry.



  • Specifications +


    SPECIFICATIONS

    HIGH TORQUE CAP
    Low Temp 25 ° C High Temp 60 ° C
    Brookfield Part # Viscosity
    cP (mPa · s)
    Brookfield Part # Viscosity cP
    (mPa · s)
    CAP1L 89 CAP1H 89
    CAP2L 177 CAP2H 177
    CAP3L 354 CAP3H 354
    CAP4L 708 CAP4H 708
    CAP5L 1,417 CAP5H 1,417
    CAP6L 3,542 CAP6H 3,542
    CAP7L 1,328 CAP7H 1,328
    CAP8L 5,313 CAP8H 5,313
    CAP9L 21,250 CAP9H 21,250
    CAP10L 236 CAP10H 236

    LOW TORQUE CAP
    Low Temp 25 ° C High Temp 60 ° C
    Brookfield Part # Viscosity
    cP (mPa · s)
    Brookfield Part # Viscosity cP
    (mPa · s)
    CAP0L 57 CAP0H 57
    CAP1L 89 CAP1H 89
    CAP2L 177 CAP2H 177
    CAP3L 354 CAP3H 354
    CAP4L 708 CAP4H 708
    CAP5L 1,417 CAP5H 1,417