Viscosity Standards

Brookfield Viscosity Silicone and Oil Standards provide a convenient, reliable way to verify the calibration of your Brookfield laboratory viscometer/rheometer. If you're confused about which standards you need, see our FAQ section.

Viscosity standards should be replaced on an annual basis.
  • Oil Viscosity Standards 215x180
    CAP Oil Fluids

    CAP Viscosity Standard Fluids are used for calibrating Brookfield CAP series Viscometers.

    Keep Reading
  • Oil Viscosity Standards 215x180
    General Purpose Oil

    Brookfield Oil Viscosity Standards are used to check the calibration of specific instruments such as cone/plate viscometers or rheometers.

    Keep Reading
  • Silicone Viscosity Standards 215x180
    General Purpose Silicone

    Silicone viscosity standards are commonly used to verify calibration of Brookfield Viscometers and Rheometers.

    Keep Reading
  • Silicone Viscosity Standards 215x180
    High Temperature Silicone Fluids

    High Temperature Silicone Fluids are Newtonian fluids calibrated at 25°C, 93.3°C and 149°C. These fluids are accurate to ±1% of viscosity value and are recommended for use with the Brookfield Thermosel accessory.

    Keep Reading
  • Oil Viscosity Standards 215x180
    Krebs Viscometer Oil Fluids

    Krebs Oil Fluids are for use with the Brookfield KU series Viscometers. Like all Brookfield Viscosity Standards, the Krebs Oil Fluids are accurate to ±1%.

    Keep Reading
  • Oil Viscosity Standards 215x180
    RST Oil Fluids

    Silicone viscosity standards are commonly used to verify calibration of Brookfield Viscometers and Rheometers.

    Keep Reading
  • Silicone Viscosity Standards 215x180
    Special Order Silicone Fluids

    Silicone viscosity standards are commonly used to verify calibration of Brookfield Viscometers and Rheometers.

    Keep Reading
  • VisCal Kit - Glass 215x180
    VisCal Kit

    Conveniently test the calibration of your viscometer or rheometer with this all-in-one viscosity calibration kit.

    Keep Reading